Home page

High density polyethylene geomembrane

Geomembrane paving is completed, should minimize walking on the membrane surface, moving tools, etc., where the geomembrane can cause harm to the object, should not be placed on the membrane or carry walking on the membrane, so as not to cause accidental damage to the membrane. When laying geomembrane, we should strive to weld less, under the premise of ensuring the quality of welding, and try to save raw materials. The lap width of the joints between the membrane and the membrane is generally not less than 10cm, and the weld seams are usually arranged parallel to the larger slope, i.e. along the direction of the slope.

Classification :

Polyethylene Black Film

Keywords :

Polyethylene Black Film

+8615806698096

info@sdzhgeomaterials.com

E-mail

PRODUCT DETAILS

Purpose of action

Environmental protection engineering: landfill, sewage treatment plant, chemical wastewater pond, power plant regulating pond, industrial/medical waste landfill, ash field, evaporation pond seepage control.

Petrochemical: petrochemical refinery tanks, oil well sludge ponds, chemical reaction ponds, sedimentation ponds, tailings dams, bottom lining, secondary lining seepage control. Secondary lining seepage control.

Chemical and mining industry: the bottom lining seepage control of ash field, red mud pile, heap leaching pool, dissolving pool, sedimentation pool, tailings dam.

Aquaculture: lining of aquaculture ponds, fish ponds, shrimp ponds, seepage control of sea cucumber rings and slopes.

Construction engineering: subway, underground garage, roof garden, sewage pipe, seepage control of dredging culvert.

Agriculture, forestry and animal husbandry: seepage control of reservoirs, cisterns, drinking water pools and irrigation systems.

Salt chemical industry: seepage control of salt crystallization ponds, brine ponds and salt membranes.

Construction technology

Technical indicators

Linear low-density polyethylene geomembrane for environmental protection (GL-2 type)

NO.	Item	Indicator
NO.	thicknesses mm	0.50	0.75	1.00	1.25	1.50	2.00	2.50	3.00
1	densities g/cm³	≤0.939
2	Tensile breaking strength (longitudinal and transverse) N/mm	≥13	≥20	≥27	≥33	≥40	≥53	≥66	≥80
3	Elongation at break (longitudinal and transverse) %	≥800
4	2% positive cut modulus N/mm	≤210	≤370	≤420	≤520	≤630	≤840	≤1050	≤1260
5	Right angle tearing load (longitudinal and transverse) N	≥50	≥70	≥100	≥120	≥150	≥200	≥250	≥300
6	puncture strength N	≥120	≥190	≥250	≥310	≥370	≥500	≥620	≥750
7	Carbon black content %	2.0～3.0
8	Carbon Black Dispersibility	No more than 1 out of 10 data at level 3, not allowed at levels 4 and 5
9*	Oxidation induction time(OIT) min	Atmospheric pressure oxidation induction time ≥100
9*	Oxidation induction time(OIT) min	High pressure oxidation induction time ≥ 400
10	Thermal aging at 85 ℃ (OIT retention at atmospheric pressure after 90d) %	≥35
11*	UV resistance (OIT retention after UV irradiation for 1600h) %	≥35
Note: The technical performance index requirements for thickness specifications not listed in the table are implemented in accordance with the interpolation method.
The atmospheric pressure OIT (retention) and the high pressure OIT (retention) of the two indicators 9 and 11 can be tested for either one.

FACTORY APPEARANCE

We mainly produce PP bidirectional geogrids, PE and PP unidirectional geogrids, warp knitted geogrids, glass fiber geogrids, basalt geogrids, geotextiles, geomembranes, geonets, safety fences, three-dimensional geogrid mats, geocomposite products, etc.

Shandong Zhonghuan Engineering Materials Co., Ltd.

HONOR

The products are mainly used in the infrastructure construction of roads, railways, irrigation projects, electricity, soil and water conservation and environmental greening.

FAQ

Q: Can we take some samples? Any fees?

A: Yes, we can provide samples free of charge, but we don't pay for shipping. If you place an order after confirming the sample, we will refund your delivery fee or deduct it from the order amount.

Q:Can you deliver the goods on time?

A: Yes, we guarantee the best quality products and punctual delivery. Integrity is the tenet of our company.

Q: What are the loading ports?

A: In general, we ship the goods from Shanghai, Tianjin, Qingdao and Ningbo ports. You can designate other ports according to your needs.

Q: Is there quality inspection before loading?

A: Of course, all our products go through strict quality inspection before packing. Those that fail will be destroyed. Customers can also entrust a third party to inspect the products before loading.

Q: How is the product packaged?

A: Standard export seaworthy packing with waterproof paper inside and iron outside, secured by fumigated wooden pallets. It can effectively protect products from corrosion and various climate changes during Marine transportation.

Polyethylene Black Film