How many years can fish pond anti-seepage membrane be used?

The fish pond membrane is particularly suitable for situations where the soil cannot retain water. In some areas, the sandy soil is filled with water and will leak out in a short time. In this case, the cost of using an anti-seepage membrane is lower than the traditional anti-seepage foundation. Construction is faster and subsequent maintenance is more convenient.

       How many years can fish pond anti-seepage membrane be used?

       The fish pond film uses new polyethylene as the main raw material, and has double anti-aging (anti-ultraviolet and anti-aging ingredients) inside to greatly extend its service life.

       0.4-0.5 mm is a commonly used specification for fish pond membranes. As long as it is used properly, the underground service life can reach more than 20 years. The exposed part on the slope can be used for more than 6-10 years. The exposed part on the slope can also be covered with geotextile, and the service life will be longer. .

       How many years can fish pond anti-seepage membrane be used?

      The following introduces the precautions for using fish pond membrane and how to lay it: When renovating a new fish pond or old fish pond, the bottom and slope of the fish pond must be cleaned, such as small pebbles, tree roots, and reed roots. All must be cleaned, otherwise it will take a long time. , plus the pressure of the water will puncture the membrane.

       Laying fish pond membrane is actually very simple. As long as the front work is done well, the subsequent laying will be much easier. After digging a pond, first compact and level the slope and bottom. The best area is more than 2 acres.

        Then measure the dimensions. After measuring the length and width of the bottom and the length of the slope, I can help you calculate the dimensions, or you can calculate how many square meters of membrane you can use.

        Fish pond membranes can be produced in widths from 1 meter to 8 meters, and in any length. After laying the membrane, overlap it by 10-15 centimeters. Use a welding machine to weld the membranes and weld all the membranes into a whole to achieve better results. Anti-seepage effect.